SBM30-03 no.6967-1/3 features ? supports automatic mounting and permits SBM30-03 applied sets to be made smaller. ? low forward voltage (v f max=0.4v). ? average rectified current : i o =3a. specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit peak reverse voltage v rm 30 v average rectified current i o 50hz sine wave, ta=25 c 2.1 a load resistor, tc=100 c 3.0 a surge forward current i fsm 50hz sine wave 30 a non-repetitive, 1cycle peak value junction temperature tj 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit forward voltage v f i f =0.5a 0.4 v i f =1.5a 0.46 v reverse current i r v r =30v 0.05 ma thremal resistance q i-l junction-lead 20 c/w q i-a junction-ambient, mounted on an 80 c/w almina board. marking : o sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn6967b d1003 ts im ta-100910 / 62901 gi im / 51001 gi im any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. SBM30-03 schottky barrier diode 30v, 3a rectifier
SBM30-03 no.6967-2/3 package dimensions unit : mm 1300 1.0 1.8 1.0 1.0 1.8 1.0 1.4 0.5 2.8 cathode mark 3.9 sanyo : shp p f -- i o i f -- v f p r -- v r i r -- v r forward power dissipation, p f -- w reverse power dissipation, p r -- w output current, i o -- a forward voltage, v f -- v forward current, i f -- a reverse voltage, v r -- v reverse current, i r -- ma reverse voltage, v r -- v it03445 it03446 it03448 0.1 0.3 0.5 0.7 0 0.2 0.4 0.6 0.8 0 0.5 1.0 2.0 2.5 3.0 3.5 1.5 0.5 1.0 2.0 2.5 1.5 0 2 1.0 7 5 3 10 7 5 3 2 0.1 0.001 2 0.1 0.01 7 5 3 2 7 5 3 1.0 7 5 3 2 10 7 5 3 2 100 7 5 3 2 0123456 25 c 125 c 100 c 75 c 50 c tc=125 c tc=150 c 0.2 0.5 dc dc sin 0.2 0.5 sin tj=150 c i o tp d=tp / t t 0 tj=150 c d=tp / t t 0 vr it03447 0 10203040 0 10203040
SBM30-03 no.6967-3/3 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of december, 2003. specifications and information herein are subject to change without notice. ps 0 50 100 150 200 0 1 2 4 5 6 3 1.0 10 23 57 100 23 57 dc 0.2 0.5 mounted on a print board v r =15v tj=150 c i o tp d=tp / t t 0 i fsm -- n peak surge forward current, i fsm -- a number of cycles, n it03449 0 5 10 20 25 30 35 15 ta=25 c 50hz i o -- tc output current, i o -- a case temperature, tc -- c it03450 sine wave
|
